Please scroll all the way down to locate your bug zapper by brand name and mannequin type and observe our directions on the way to change your bug zapper globe. At no time are you ever to take away the hood or cage of the bug zapper to change the globe. This can then enable access to stay components and void warranty. Which is your Bug Zapper? Click the links below to find the directions for that exact bug zapper. 1. Unplug your Bug Vac and remove from its mounting place. 2. Resting your Bug Vac on a gentle surface take away the water draw from the lure. 3. Remove the lens by locating the hole at the bottom of the lens in the centre, use your fore finger and thumb to squeeze the empty drawer holder together and Zap Zone Defender punctiliously slide a skinny steel object. 4. Gently angle the article behind the lens to lift the centre and release the left tab by sliding the lens to the best.

Repeat by sliding the lens to the left to launch the best tab. 5. Twist the globe to open the lamp holder to take away the lamp. 7. Twist the new globe into place to close the lamp holder. 8. Replace the lens by inserting the left tab into its corresponding gap and repeat with the precise tab. 9. Secure the lens by pushing it downwards, you will feel it click into place. 10. Replace the drawer crammed with water and several other drops of detergent. 11. Plug your bug zapper into the power socket and the globe should mild up. Following steps 1-5 verify the globe is secure in the lamp holder and change plastic cowl. Use real yard guard alternative lamps in your bug zapper. In case you have followed these steps and Zap Zone Defender Testimonial your zapper still won’t mild up, please contact us. 2. Holding your bug zapper, turn it the wrong way up so the hood is facing away from you.

3. Access the sunshine by locating the lever in the centre of the bug zapper and pull with your finger in direction of you. 4. The bulb cowl will open and you will be capable of access the alternative globe. 5. Gently pull at the globe to remove it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and secure by again pulling the lever in direction of you after which releasing as soon as the cowl has closed securely. 9. Plug your bug zapper into the power socket and Zap Zone Defender Testimonial the globe should gentle up. Following steps 1-four verify the globe is safe within the lamp holder and exchange plastic cover. When you have followed these steps and your zapper still won’t mild up, please contact us. 2. Holding your bug zapper, turn it upside down so the hood is going through away from you. 3. Access the sunshine by locating the lever in the centre of the bug zapper and pull with your finger in direction of you.

4. The bulb cover will open and you will be capable to entry the alternative globe. 5. Gently pull on the globe to remove it from the lamp holder. 8. Replace plastic cover on the underside of the bug zapper and secure by again pulling the lever towards you after which releasing as soon as the cover has closed securely. 9. Plug your bug zapper into the ability socket and the globe ought to light up. Following steps 1-4 examine the globe is secure within the lamp holder and Zap Zone Defender substitute plastic cover. In case you have followed these steps and your zapper still won’t mild up, please contact us. 2. Holding your bug zapper, turn it the other way up so the hood is facing away from you. 3. Using a phillips head screwdriver take away the 2-3 screws located on the underside of the bug zapper. 4. Remove the plastic cover sealing the bug zapper globe in place.